| Paketname | usb-modeswitch-data |
| Beschreibung | mode switching data for usb-modeswitch |
| Archiv/Repository | Offizielles Debian Archiv squeeze (main) |
| Version | 20100826-1+squeeze0 |
| Sektion | comm |
| Priorität | extra |
| Installierte Größe | 696 Byte |
| Hängt ab von | udev (>= 0.140) | not+linux-gnu |
| Empfohlene Pakete | usb-modeswitch (>= 1.1.4) |
| Paketbetreuer | Didier Raboud |
| Quelle | |
| Paketgröße | 20928 Byte |
| Prüfsumme MD5 | 9b7c07829d96c233011ae37c421dca83 |
| Prüfsumme SHA1 | 62474ca9b8e3718eb7acf43a9f60c03a0e99c5fc |
| Prüfsumme SHA256 | 5185ae8746a8e69288d611de65a983e0351e7be4657c885594d9df2ef6f1bc38 |
| Link zum Herunterladen | usb-modeswitch-data_20100826-1+squeeze0_all.deb |
| Ausführliche Beschreibung | Several new USB devices have their proprietary Windows drivers onboard,
especially WAN dongles. When plugged in for the first time, they act
like a flash storage and start installing the driver from there. If
the driver is already installed, the storage device vanishes and
a new device, such as an USB modem, shows up. This is called the
"ZeroCD" feature.
.
On Debian, this is not needed, since the driver is included as a
Linux kernel module, such as "usbserial". However, the device still
shows up as "usb-storage" by default. usb-modeswitch solves that
issue by sending the command which actually performs the switching
of the device from "usb-storage" to "usbserial".
.
This package contains the commands data needed for usb-modeswitch.
|