| Paketname | pump |
| Beschreibung | BOOTP and DHCP client for automatic IP configuration |
| Archiv/Repository | Offizielles Debian Archiv squeeze (main) |
| Version | 0.8.24-7 |
| Sektion | admin |
| Priorität | optional |
| Installierte Größe | 112 Byte |
| Hängt ab von | libc6 (>= 2.3), libpopt0 (>= 1.15), netbase |
| Empfohlene Pakete | |
| Paketbetreuer | Philippe Coval |
| Quelle | |
| Paketgröße | 33496 Byte |
| Prüfsumme MD5 | ac714e6d470d643e03b88a744248a94f |
| Prüfsumme SHA1 | e02508aaabae9cc68dd8aa8064754dad451a5bcc |
| Prüfsumme SHA256 | a5d0887e71fc2fe552dc679b8e2c328f64b42add54086f3231df4f8a56533e01 |
| Link zum Herunterladen | pump_0.8.24-7_i386.deb |
| Ausführliche Beschreibung | This is the BOOTP/DHCP client written by RedHat.
.
DHCP (Dynamic Host Configuration Protocol) and BOOTP (Boot Protocol)
are protocols which allow individual devices on an IP network to get
their own network configuration information (IP address, subnetmask,
broadcast address, etc.) from network servers. The overall purpose of
DHCP and BOOTP is to make it easier to administer a large network.
.
Pump is a combined BOOTP and DHCP client daemon, which allows your
machine to retrieve configuration information from a server. You
should install this package if you are on a network which uses BOOTP
or DHCP.
|