| Paketname | multimon |
| Beschreibung | Linux Radio Transmission Decoder |
| Archiv/Repository | Offizielles Debian Archiv squeeze (main) |
| Version | 1.0-5 |
| Sektion | hamradio |
| Priorität | optional |
| Installierte Größe | 140 Byte |
| Hängt ab von | libc6 (>= 2.3), libx11-6, sox |
| Empfohlene Pakete | |
| Paketbetreuer | A. Maitland Bottoms |
| Quelle | |
| Paketgröße | 37708 Byte |
| Prüfsumme MD5 | 50551dbb21f75043eabf302a31e9a6e1 |
| Prüfsumme SHA1 | 5bc45da0065ee78df014c9db0e2910a7fa3fc1d3 |
| Prüfsumme SHA256 | d3f155f51a566316b6fe129652865dd4fdeded204ed87ce412a4179b37f8d663 |
| Link zum Herunterladen | multimon_1.0-5_i386.deb |
| Ausführliche Beschreibung | The multimon software can decode a variety of digital transmission modes
commonly found on UHF radio. A standard PC soundcard is used to acquire
the signal from a transceiver. The decoding is done completely in software.
Currently, the following modes are supported:
AX.25
1200 Baud AFSK
2400 Baud AFSK (2 variants)
4800 Baud HAPN
9600 Baud FSK (G3RUH)
POCSAG
512 Baud
1200 Baud
2400 Baud
Miscellaneous
DTMF
ZVEI
An arbitrary set of the above modes may run concurrently on the same input
signal (provided the CPU power is sufficient), so you do not have to know
in advance which mode is used. Note however that some modes might require
modifications to the radio (especially the 9600 baud FSK and the POCSAG
modes) to work properly.
POCSAG (Post Office Code Standards Advisory Group) is a common paging
transmission format.
|